|
|
|
|
|
|
|
#1
04-07-2003, 11:19 PM
|
|||
|
|||
|
Cruise control retrofit
Before I pull things apart to find out, can anyone tell me if my 190E, which does not have cruise control, will have the necessary wiring in the harness to retrofit one? Obviously I will need to obtain and fit the control lever, throttle actuator, amplifier and clutch pedal switch. The brake pedal makes use of the stop light switch I think. I will also need the speed sensor behind the speedometer if that is not a standard fitment (ie. part of the instrument cluster). If the cruise control wiring is not in the existing harness, is it then a separate harness which can also be retrofitted? Any advice would be appreciated.
Thanks
__________________
107.023: 350SLC, 3-speed auto, icon gold, parchment MBtex (sold 2012 after 29 years ownership). 107.026: 500SLC, 4-speed auto, thistle green, green velour. 124.090: 300TE, 4-speed auto, arctic white, cream-beige MBtex. 201.028: 190E 2.3 Sportline, 5-speed manual, arctic white, blue leather. 201.028: 190E 2.3, 4-speed auto, blue-black, grey MBtex. 201.034: 190E 2.3-16, 5-speed manual, blue-black, black leather. 
|
|
#2
04-09-2003, 12:39 AM
|
|||
|
|||
|
Anyone?
Can anyone save me the trouble of pulling things apart to find out if this is a possible retrofit?
__________________
107.023: 350SLC, 3-speed auto, icon gold, parchment MBtex (sold 2012 after 29 years ownership). 107.026: 500SLC, 4-speed auto, thistle green, green velour. 124.090: 300TE, 4-speed auto, arctic white, cream-beige MBtex. 201.028: 190E 2.3 Sportline, 5-speed manual, arctic white, blue leather. 201.028: 190E 2.3, 4-speed auto, blue-black, grey MBtex. 201.034: 190E 2.3-16, 5-speed manual, blue-black, black leather.
|
 |
| Bookmarks |
|
|
Hybrid Mode
