I placed this car in storage about 4 years ago and went to drive the car this past summer and discovered the emergency brake had been left on.

Now the brake seems to be stuck and I believe could even be rusted in place.

I tried driving the car and still the break stayed locked into place and even caused a heavy brake burning smell when I tried to drive the car.

Any thoughts on how I will get the break un stuck?

Is this going to be expensive?

Thanks for your time and for the information provided.

Hello Terry,

First thing that I would do is to spray some penetrant/lubricant into the tubing that the cable goes into/comes out of. Sometimes you can get these things loose by stepping on the e-brake repeatedly while activating the release mechanism. A 'quick fix' alternative is to see if you can get a hold of the cable with a pair of pliers (or the like) and then hit the pliers with a hammer forcing the cable back towards the front of the car. ( this worked for me once in a parking lot) Careful with the spray so you don't get any on the brake shoes/pads/rotor/drum.

Good Luck!

ps: welcome to the "Shop"

------------------
03/83 300D
07/73 280