|
|
|
|
|
#1
04-30-2003, 11:27 AM
|
|||
|
|||
Climate - Low and medium fan only ('95 S320)
My climate control (blower motor) only operates at low and medium (maby not even medium ) speed. If set to auto or high it barely makes medium speed.
I had this fixed a couple of years back at the dealer, but as usual everything done at the dealer breakes after a short time. I do not remember exactly what the problem was that caused this anouying problem. I would like to takle it myself now and hope someone can point me in the right direction.
__________________
regards, Sab. '07 ML320 CDI (398 ft lbs / 1400 RPM)  '02CL 500 '91 928 GT Supercharged Last edited by sab; 04-30-2003 at 11:36 AM. 
|
|
#2
04-30-2003, 12:41 PM
|
|||
|
|||
|
I followed the operational check as described at:
http://pages.prodigy.net/jforgione/MB_AAC.html and the operational check shows normal. The step 8 shows reading from 8 - 60 volts to the motor according to the settings on the speed.  Trying to follow the procedures to read out the error codes, I can't get them to come up. It always displays the Operational check readings again. 
__________________
regards, Sab. '07 ML320 CDI (398 ft lbs / 1400 RPM) '02CL 500 '91 928 GT Supercharged
|
 |
| Bookmarks |
|
|
Linear Mode
