Help Please with fitting 2nd 3rd gear flare kit 126 270 44 77
 

1990 300CE-24v (UK Model)
Having read all the posts I can find in the forum on 2-3 flare I have purchased the kit 126 270 44 77 that was highly recommended however I can find no instructions on EXACTLY how to install it . Also my kit has 3 springs and all the posts previously refered to 2 springs in the kit . Is there MB service letter or something that covers fitting it ?
I have attached a picture of the kit.
Any guidance will be appreciated
Larry

I want fit this kit at the weekend if I can get the info.
Help would be much appreciated
Larry

Email a member by the name of esm6869.

He has instructions that he can fax to you.

Hi Larry,
I have a 90 300E24V with the same problem and would be very interested in the installation process of this kit.Can you take some pics?I have some pics of the VB if you want to see them plz let me know,maybe they can help you.
PS nice pic of the kit as I can now show it to the dealer because they did not know what I was on about.
thanx,chris

Larry,hope this will help and also call Mario from Independant Transmission services in Miami on 666-3544,they say he is a genius!

I am making progress and now have the attached MB info which addresses most of my questions however I am still not sure how to assemble the kit.
I assume the white valve is pushed into the giude and the small diameter spring locates around the guide body and the short larger dia spring locates on the end of the guide and the large spring goes around the smaller dia spring ??????????????????
Any advise will be much appreciated
Also the sheet recommends Service Microfiche for Auto Trans 722.4 Group 27, Job 27-400 can any one please post or email that to me
Many thanks Larry

Service Microfiche for Auto Trans 722.4 needed
 

Wanted Service Microfiche for Auto Trans 722.4 Group 27, Job 27-400 can any one please post or email that to me
Thanks
Larry