Greetings from Fairbanks, Alaska. I would like to know if this is something I could do myself: My ash tray light is out and also the display which tells what gear Iam in on the floor is out is this an easy fix or should I seek tech help. I have a 92 190e, Automatic. Thanks for your help you guys are great!!!!!
|
The wood will pull up and the bulb is in a holder under there. The ashtray will pull out and there is two small screws that hold it. Take them out and pull out the frame.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
FYI. I have a 87 300TDT that had similar issue. The console is a little tough to lift off because of little plastic snaps underneath. This was my first question for the Mercedesshop and Benzmac steered my straight. Becreful though, because the wood is very expensive to repalce if you crack it. Lastly, I found my bulb was fine, but had fallen out of the socket. I stuck a little foam rubber under the bulb after I stuck it back in so it would never fall out again.
Good luck! ------------------ Deezel 87 300TDT 150,000 miles |
All times are GMT -4. The time now is 06:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website