Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-29-2000, 04:25 PM
Mark E
Guest
 
Posts: n/a
Greetings from Fairbanks, Alaska. I would like to know if this is something I could do myself: My ash tray light is out and also the display which tells what gear Iam in on the floor is out is this an easy fix or should I seek tech help. I have a 92 190e, Automatic. Thanks for your help you guys are great!!!!!
Reply With Quote
  #2  
Old 02-29-2000, 10:13 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
The wood will pull up and the bulb is in a holder under there. The ashtray will pull out and there is two small screws that hold it. Take them out and pull out the frame.

------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM


Reply With Quote
  #3  
Old 03-01-2000, 11:21 PM
Deezel
Guest
 
Posts: n/a
FYI. I have a 87 300TDT that had similar issue. The console is a little tough to lift off because of little plastic snaps underneath. This was my first question for the Mercedesshop and Benzmac steered my straight. Becreful though, because the wood is very expensive to repalce if you crack it. Lastly, I found my bulb was fine, but had fallen out of the socket. I stuck a little foam rubber under the bulb after I stuck it back in so it would never fall out again.

Good luck!

------------------
Deezel
87 300TDT
150,000 miles

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replaced Shift Bushings - Gear Shifter still indicates between D and N Johne 320 Tech Help 3 01-27-2009 09:38 PM
83 240D tranny won't shift past 2nd gear. dmorrison Tech Help 15 08-14-2006 08:25 PM
'88 560sl gear shift seems really loose David Langsam SL Forum 3 09-20-2004 12:08 AM
89-300ce harsh 1-2 gear shift. 89-300ce Tech Help 0 04-21-2004 01:34 PM
sticking gear shift mcollie Tech Help 1 01-08-2003 11:08 AM



All times are GMT -4. The time now is 01:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page