Replacing heater fan motor
What is the reccomended procedure for replacing the squirrel cage fan unit on a '89 190e 2.6? The bearings are shot on the exhisting unit and I have already purchased the replacement fan from my local dealer.
|
After doing a search on this site for you using the search feature above, here is how to do it:
Posted by daveCT on 02-18-2003 10:01 PM: just changed mine in a 86 190e 16v it takes about 30 min ,with a 8mm, 10mm ,13mm,and a screwdriver , first, grill comes out (4 , 5 nuts), the wiper linkage must come out, few bolts , slides out from passager side, blower box has 6 metal straps that pry's off easy, motor has one metal clip , pry's off easy, drop the motor in plug in , off you go. See: 190E Blower Motor Replacement Haasman |
Excellent advice, THANK YOU! :)
...Although removing the wiper assembly wasn't as easy as I hoped. :( |
All times are GMT -4. The time now is 04:44 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website