When slowly accelerating the transmision isn't as smooth as when accelerating more rapidly.
Can this be adjusted? The service CD haas no info on trans or I haven't found it yet. ------------------ 1991 350 SDL 114,000 miles |
There are several vacuum controls on 1991 350SDL for transmission control. Many times even "trained" technicians have problems w/these control adjustments.
|
Suggest you try adjusting the modulator. It is a vac. control on the driver side of the transmission. You can find it by looking for a black plastic vac. line that is attached and also look for a plastic part that has a small rubber cap on it. Pry the cap off and there will be slots visable, in the slots will be a "key". Pull the key out far enough to bypass the slots and try adjusting it in or out 1/2 turn at a time. Turning in will be a harder shift, turning out will be a softer shift. The shift should be firm but not so hard that you feel a distinct jerk.
|
Same problem here. Have an 85' 300D 124.
|
I have seen a small yet informative section in the cd's uder the engine section. You have to dig to find it. It gives the vaccum lay out and what the different pieces do.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
All times are GMT -4. The time now is 01:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website