PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Analysis help: Trans Shift Delay (http://www.peachparts.com/shopforum/tech-help/66898-analysis-help-trans-shift-delay.html)

Johne 320 06-06-2003 09:45 PM

Analysis help: Trans Shift Delay
 
I have read may threads on the following subject but can not figure out what is the problem.

My 1994 E320 no longer delays it's trans shift from 2nd to 3rd when engine is cold as it once did. The engine light came on,: The code is #26 - Shift Delay Switch.

1. The Shift Delay Switch behind the master cylinder holds vacuum only from one side of the switch. Is this normal, or should it hold vac from both sides.

2. The Green vac hose going to the trans holds about 5 in on the gage max. Sometimes it will not hold any vac. I can try a second later, and it hold 5 in Hg again. Is this normal?

3. Could the problem be electrical?

I am just guessing here and could use some help. WHAT SHOULD I CHECK NEXT??

Much Thanks, John

Mick J 06-07-2003 06:40 AM

Sounds like you have a leaky vac hose or bad connection.


All times are GMT -4. The time now is 09:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website