I sucessfully changed the dash in my 78 300D last weekend!
However I noticed the ignition switch is not
centered thru the hole in the dash.
Is it possible to loosen the switch and center it in the dash?

Matthew
78 300D 143,000 mi

There is a certain amount of up and down movement but little in and out (side to side as concerns the dash). The steering lock has a pinch collar that would allow most anything but it is located by a centering screw that pretty much positions the lock in and out of the steering column.

------------------
Steve Brotherton
Owner 24 bay BSC
Bosch Master, ASE master L1
26 years MB technician

You can loosen the screw and adjust then tighten back down.

------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM