|
|
|
|
|
#1
03-14-2000, 11:00 AM
|
|||
|
|||
|
I sucessfully changed the dash in my 78 300D last weekend!
However I noticed the ignition switch is not centered thru the hole in the dash. Is it possible to loosen the switch and center it in the dash? Matthew 78 300D 143,000 mi 
|
|
#2
03-14-2000, 02:29 PM
|
|||
|
|||
|
There is a certain amount of up and down movement but little in and out (side to side as concerns the dash). The steering lock has a pinch collar that would allow most anything but it is located by a centering screw that pretty much positions the lock in and out of the steering column.
------------------ Steve Brotherton Owner 24 bay BSC Bosch Master, ASE master L1 26 years MB technician
|
|
#3
03-14-2000, 09:05 PM
|
|||
|
|||
|
You can loosen the screw and adjust then tighten back down.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ignition switch | VinnyW | Tech Help | 0 | 05-10-2004 10:59 PM |
| 300 SDL Have ignition switch proplem... | Sooty Taillight | Diesel Discussion | 2 | 05-03-2004 07:26 PM |
| Steering wheel lock-out on ignition switch... | The Warden | Diesel Discussion | 4 | 08-29-2002 07:54 AM |
| help with 108 Ignition switch | Mercedes108 | Vintage Mercedes Forum | 3 | 06-20-2002 04:08 PM |
| Ignition switch wires | TurboTurbine | Tech Help | 3 | 10-21-2001 08:49 PM |
Linear Mode
