|
|
|
|
|
#1
06-19-2003, 02:42 PM
|
||||
|
||||
|
Replacing Vacuum Lock Actuator
Folks,
When I unlock the driver door, all works well... but when I unlock the trunk, all doors unlock except for the driver door. The lock comes up partially (about 3/4), but not enough to physically unlock the door. I'm guessing that this is the actuator. I need to fix this, as I am putting in a BergWerks keyless entry system. As is, the keyless system will probably unlock all doors except for the driver door. Where exactly is the actuator on a 94 E420? I took the door panel off and can't really see it. How hard is it to replace?
__________________
Willy '94 E420 White Mods ------- Berg Werks Keyless Entry Buzzer replaced with Chime Dash Light Upgrade Burlwood/Leather shift knob Alpine CDA-9815 Head Unit 2002/2003 16" C Class 7-Spoke Wheels Updated "Chip" to fix Code 19 problem 
|
| Bookmarks |
|
|
Threaded Mode
