![]() |
|
|
|
|
#1
|
||||
|
||||
Upper wire harness testing
How to go about testing the upper wire harness on a 1994 S420? any hints
The question is how to test for broken wires
__________________
1994 ~ S420 ![]() ~~~~~~~~~~~~~~~~~~~~~~~~ 1998 Monaco Dynasty 40' 1994 S420, 1999 Ford ClubWagen Last edited by inventor; 11-02-2021 at 06:15 PM. Reason: Updating for more info |
#2
|
|||
|
|||
Check for the white tag with Delphi printed on it. The tag is up by the harness connector.
Sent from my SM-A515U using Tapatalk |
#3
|
||||
|
||||
Yes that is good but how to test for broken wires?
__________________
1994 ~ S420 ![]() ~~~~~~~~~~~~~~~~~~~~~~~~ 1998 Monaco Dynasty 40' 1994 S420, 1999 Ford ClubWagen |
#4
|
||||
|
||||
Is this what you looking for MB 140 5401132
__________________
1994 ~ S420 ![]() ~~~~~~~~~~~~~~~~~~~~~~~~ 1998 Monaco Dynasty 40' 1994 S420, 1999 Ford ClubWagen |
#5
|
|||
|
|||
I have yet seen an updated harness have a broken wire. Once the harness is replaced, it is done.
Sent from my SM-A515U using Tapatalk |
#6
|
||||
|
||||
COMPLITED
Thanks I ended up using a continuity tester and the harness checked out Ok
__________________
1994 ~ S420 ![]() ~~~~~~~~~~~~~~~~~~~~~~~~ 1998 Monaco Dynasty 40' 1994 S420, 1999 Ford ClubWagen |
![]() |
Bookmarks |
|
|