|
|
|
#1
|
|||
|
|||
W140 new front rotors
My front rotors are warped and I want to instal new ones. I can't find anything on a front brake job in the archives. Can anyone give me any tips - I've changed rotors on otjher Euro vehicles - is it common sense or do I need to watch for anything in particular?
All advice gratefully accepted TIA Andy |
#2
|
|||
|
|||
Hi Andy,
there should be plenty under rotors. Thomaspin also has a website with pictures about that, if I am not mistaken. Regards Reinhard Kreutzer |
#3
|
||||
|
||||
Nothing special
Changed both front rotors on my W140 recently... very easy job if the rotor isn't rusted to the hub.
Just pull the pads/caliper, move it out of the way. Remove the caliper mounting front the knuckle (these are bolted on pretty tight). I found the bolts came out a lot easier if they are heated some... I suspect there's Loctite (or similar) on the threads. Remove the allen screw and lift off the rotor. KenP |
#4
|
||||
|
||||
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580) |
Bookmarks |
|
|