|
|
|
#1
|
|||
|
|||
How do I clean points on fuel sender?
The fuel sender has been replaced by PO, the gauge is still real whacky, my mechanic said to clean the connections, and I was wondering how to get to them.
Thanks Tim PS: This is a 1972 280SEL 4.5 |
#2
|
|||
|
|||
Many times on the W108/109 cars the wiring harness that plugs to the sending unit in the trunk is too short. Most of the time you will find broken wires at that connector.
THE only contact points are for the reserve light.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|