|
|
|
#1
|
|||
|
|||
ACC temp. sensor replacement
I am going to replace the temp. sensor on my 93 300se , model 140. Is there any special type of sealant or teflon tape that I should put on the threads of the sensor before I install it,
or do I install it with nothing on the threads. Please advise. |
#2
|
|||
|
|||
Which sensor are you replacing?
__________________
Mercedes Benz Master Tech - Retired |
#3
|
|||
|
|||
Temp sensors on the engine use aluminum "crush" seals, nothing else is needed!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|