123 wagon strut problems
In attempting to install new rear hatch struts in my 300TD, I have run into a big problem. I got one strut out, but could not seem to line up the bolt under the headliner with the strut and its receiving hole. I could get it into the opening of the strut, but I could not seem to get it threaded. Now, after looking at it carefully, I think that the first ring of threads may be cross threaded--with the strut out of the car, I can start the bolt, but only turn it a few times before it gets really tight, so of course I backed off.
Anyone with knowledge of how to fix a possibly stipped thread in this inconvenient place, please advise. Also, anyone who has a secret for getting the strut lined up correctly and getting the bolt through, then attaching the collar to the hinge, please let me know. Thanks. Joe Bauers bauersjo@soltec.net. |
All times are GMT -4. The time now is 04:36 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website