|
|
|
#1
|
||||
|
||||
Does anybody know how to calibrate a 190E speedo?
Took the 190e's speedo apart again to solve the odometer failure, looks like I got it this time.
After reinstalling it, it is obvious the MPH reading is off. I had to pull the speedo needle off and I guessed at the appropriate position to reinstall it. Haasman
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580) |
#2
|
|||
|
|||
There should be a line BELOW the peg on the speedo's face to re-align the needle, after installing the needle to that position you must slightly lift the needle & then it will be spring loaded to the peg.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
M.B.DOC
Thanks, I will look for the line. Is it on the edge of the face? Or towards the middle. Nice to hear from someone who has "been there and done that" Haasman
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|