I purchased the 14X22.5 parallel flow condensor from ACKITS.com and had a manifold made up at a local hydraulic shop, actually 2 sets since I had to adjust everything higher then I originally thought.
I bent and welded brackets for the middle section. Sized and twisted the upper brackets. Drilled holes in the radiator support and primed them to prevent rust. Then made a bracket to support the manifold that was made. I wanted to prevent any flexing of the tubes that could lead to cracks and leaks. Attached is the condensor un-installed.

Dave

Attached Thumbnails

 

__________________
1970 220D, owned 1980-1990
1980 240D, owned 1990-1992
1982 300TD, owned 1992-1993
1986 300SDL, owned 1993-2004
1999 E300, owned 1999-2003
1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD
1988 560SL, 100,000mi, owned since 1995
1965 Mustang Fastback Mileage Unknown(My sons)
1983 240D, 176,000mi (My daughers) owned since 2004
2007 Honda Accord EX-L I4 auto, the new daily driver
1985 300D 264,000mi Son's new daily driver.(sold)
2008 Hyundai Tiberon. Daughters new car