PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   engine mounts good or bad (http://www.peachparts.com/shopforum/tech-help/8767-engine-mounts-good-bad.html)

stevepeck 07-31-2000 03:18 PM

My car idles roughly when it is first started. I have read many suggestions for fixing that, but can't figure it out.

The rough idling causes some bumpety-bump in the engine mounts. How can I tell if they are OK as-is or need replacement. There are no visoble cracks and no aging is visible. They look OK.

Thanks, in advance.

------------------
-Steve

mbdoc 07-31-2000 05:42 PM

There should be at least 13mm between the lower lip on mount & the engine mounting frame.

Benzmac 07-31-2000 09:01 PM

Any less and they should be replaced.

------------------
Benzmac:
Donnie Drummonds
1991 GMC Syclone
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

Al Spalmacin 08-04-2000 09:17 PM

My 560SEL had a very slight rumble at idle. Not so severe that you thought it would die, just enough to make you think that it was wrong to happen in a fine car such as this.

I replaced both motor mounts and the transmission mount, and the problem disappeared. Idle is now smoother, you can bearly tell the engine is running.


------------------
Al Spalmacin
1989 560SEL
1989 190E 2.6

CJ 08-04-2000 10:20 PM

I just had to jump on the bandwagon, I have a 1991 300D and I had the exact problem. Two motor mounrs and $210.00 later my problem is cured and the engine is very, very smooth.


All times are GMT -4. The time now is 07:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website