|
|
|
#1
|
||||
|
||||
weird heater blower problem.
1984 300SD. when i glow the plugs the fan would blow. but when i crank to start it the fan will stay on for 1 second then cut off. not sure if t has anything to do with the heating system but it is at the heater setting. when the car is moving there is heat, just no fan.
i checked all the fuses and they are good. i would say it was a bad blower motor but it comes on when i glow the plugs. any ideas? thanks
__________________
198? 300D ???K - Future DD 1989 300TE 285K - traded in '12 1984 300SD 186K - Sold in 08 1978 300SD 330K - Died in 05 |
#2
|
|||
|
|||
SOUNDS LIKE YOUR IGNITION SWITCH HAS A BAD SPOT. TRY TURNING THE KEY BACK JUST A HAIR AND SEE IF THE BLOWER STARTS BLOWING AGAIN ONCE THE CAR IS STARTED. THIS USUALLY COMES FORM PEOPLE HAVING TOO MANY KEYS ON THEIR KEY RING CAUSING A HAMMER EFFECT ON THE IGNITION SWITCH.
__________________
DRIVE HARD-DRIVE FAST-DRIVE TO GET THE HELL OUT OF MY WAY. 1986 190E 2.3-16 Pearl Black!! 1987 190E 2.3-16 Smoke Silver!! 1986 190E 2.5-16 Pearl Black!! 2004 CLK 500 Cabrio Designo package!! 1994 E320 Cabrio Red with black top!! 1985 500 SEL Anthracite Grey !! 2011 Subaru Impreza STI 380HP (Yeah Baby) |
Bookmarks |
|
|