PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Help Extracting Stripped Torx Bolt (http://www.peachparts.com/shopforum/tech-help/90309-help-extracting-stripped-torx-bolt.html)

Mark Herzig 03-26-2004 10:23 PM
Progress
 
Ok, some progress made tonite.

I have successfully removed 3 of the 4. The 4th will hopefully fall tomorrow.

I went back to the screw extractors and drilled out the bolt head. Once I got to the bolt shaft, the bolt head just fell off.

The forth bolt is the one closest to the firewall. I secured a 90 degree drill that will barely reach the bolt but it will be from an angle. I should be able to drill out part of the head and possibly chisel out the remainder.

Thank You everyone for taking the time to comment... IF nothing else, the moral support kept me at task!

manny 03-27-2004 12:14 AM
Re: Progress
 
Quote:
Originally posted by Mark Herzig

IF nothing else, the moral support kept me at task!
He, he,....we give you more support than your average jockstrap. :D

briandownunda 05-03-2008 02:20 PM
what size torx is used for the E300 intake manifold ?

TMAllison 05-03-2008 04:58 PM
Quote:
Originally Posted by briandownunda (Post 1843006)
what size torx is used for the E300 intake manifold ?
It is a T40. Torque is 20NM (14.75 ft/lbs). Torque from center out.


All times are GMT -4. The time now is 06:57 PM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website