Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-20-2004, 10:10 AM
Registered User
 
Join Date: Sep 2003
Location: Norway
Posts: 12
EHA-current / O2 / Duty-cycle readings (M103) - please check

I have some problems with hesitation during acceleration (not with full throttle) on my 90 260E (M103).
With small movemments with the pedal (more throttle), I get large variations in power up and down.
Feels like something holds back and then let go several times during one acceleration.

I have tested this:

Current at EHA: fluctates around 0mA (warm) and 19,5mA when ignition on / enigne off.

When I disconnect the O2-sensor (lambda) i measure about 0,8 volt. Should not this value be lower?

Duty-cycle readings fluctates around 47-52 %.

O2-sensor new january 2004.
Any comments on the readings, suggestions for further test-steps or possible couses are appreciated.



Grunde
260E
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page