|
|
|
|
|
#1
05-03-2004, 08:02 PM
|
||||
|
||||
|
Spark plug wire boots at distributor
does anyone have a trick to wiggling these off? I got the top two off ok, (one of them had white sooty deposits) and wanted to check & clean the others but couldn't seem to wiggle them free with the suppressor cover and fan getting in the way.
Although I could get some of the others to wiggle, I didn't want to pull too hard incase I damaged the wire/boot.
__________________
1993 320TE M104 --------------------------------------------------- past: 1983 230E W123 M102 1994 E300D S124 OM606 (x2) 1967 250SE W108 M129 1972 280se 3.5 W108 M116 1980 280SE W116 M110 1980 350SE W116 M116 1992 300E W124 M103 1994 E280 W124 M104 ---------------------------------------------- "music and women I cannot but give way to, whatever my business" -Pepys 
|
|
#2
05-03-2004, 10:01 PM
|
|||
|
|||
|
My theory is - first step is to twist them, make sure they are good and broken loose. From there about all you do is pull with plyers (slip joint) or lever with a bar of some sort - and it never hurts to keep twisting.
|
 |
| Bookmarks |
|
|
Linear Mode
