C280 Bad Miss on Even Slight Acceleration
My 94 C280, under even extremely gentle acceleration, started to miss badly. (Check engine light has been on throughout all this). I would have to pull over, shut off the engine, then restart the engine to get rid of the miss. I replaced the gas cap and the spark plugs, which helped tremendously. The miss is almost non-existant now, but still appears under hard acceleration. And again, the only way to get rid of the miss is to turn off the engine, then restart. The check engine light has been on throughout all this. Can anyone help? Thanks! Doug
|
If the CEL is on I suggest you get the codes read.
|
Code retrieval will probably verify, that you are setting misfire codes.
May want to have a close look at your sparkplug wires. ;) You could spray them with a fine watermist, while the engine is idling. |
M104.
Wiring harness Coils if it has the old blue labels in it really, really bad air flow meter (long shot) Joe |
replace all three of your coils and replace the boots and plug wires also. Recently had to do the same to my1995 C280
|
All times are GMT -4. The time now is 02:02 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website