Removing alternator pulley 450 SLC
I have to replace the alternator on my 450 SLC. How does one go about properly removing the pulley ?
Thanks Steve Guilford 107 026 12 000677 107 024 12 011890 |
Will require either a press or a puller. If you bought a new or Bosch rebuilt for your specific model, shouldn't it come with the pulley in place..
------------------ Jeff Lawrence 1987 300e 1989 300e 2000 Dodge Grand Caravan SE |
Guess I get to answer my own question.
The pulley assembly is held on the armature shaft by a 22mm bolt. Problem is, these bolts get frozen onto the shaft and one must hold the armature stationary in order to ratchet the bolt off. Quite difficult UNLESS you happen to have an impact wrench that will VIBRATE the bolt off. A guy at PepBoys did it for me with no problem, holding the armature assembly stationary by hand. That's the trick. It's all in the vibe. Steve Guilford 107 026 12 000677 107 024 12 011890 |
All times are GMT -4. The time now is 01:59 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website