|
|
|
#1
|
||||
|
||||
I noticed on a 380 motor (from a 126 car) that the bore is 92mm and stroke is something like 72.5. On an old 4.5 motor (116 car) the bore is also 92 but the stroke is 85. Is there anyway to get this stroke into a 380 motor and if so how and would it change the performance? Thanks.
Mike 1983 500 SEC Euro 1988 190E (soon to be 3.8) |
#2
|
||||
|
||||
[QUOTE]Originally posted by EuroCoupe:
[B]I noticed on a 380 motor (from a 126 car) that the bore is 92mm and stroke is something like 72.5. On an old 4.5 motor (116 car) the bore is also 92 but the stroke is 85. Is there anyway to get this stroke into a 380 motor and if so how and would it change the performance? Thanks. Mike 1983 500 SEC Euro 1988 190E (soon to be 3.8) **NEVER MIND** I FOUND OUT THATS NOT POSSIBLE |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Inline vs. V6 | Indy300CE | Off-Topic Discussion | 55 | 03-16-2005 01:04 PM |
Clutch slave cylinder bore and stroke? | jbhebert | Tech Help | 2 | 05-28-2004 01:56 PM |
M104 2.8L 3.2L 3.6L bore and stroke | omegabenz | Tech Help | 1 | 12-02-2002 02:29 AM |
Bore and Stroke ? | EuroCoupe | Mercedes-Benz Performance Paddock | 1 | 09-26-2000 10:44 PM |
Bore & Stroker kits for M103 engine? | MB-Estate | Mercedes-Benz Performance Paddock | 9 | 08-02-2000 07:29 AM |