Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-02-2004, 12:33 PM
ammdc7
Guest
 
Posts: n/a
condensor schrader valve leaking!!

In doing my repair of the a/c system on my 1993 190e, I found that the pin in the schrader valve on the condensor was bent by the 134a adapter. When I take off the quick-disconnect fitting there is a small leak directly out the valve, so I have simply left it on while searching for leaks in the other parts of the system. I am simply retrofitting to check for leaks, as I filled with POE oil and am possitive the system is now leak free. I used good quality valve adapters so I am confused as to why this happened, but really need to know what I should do! If I take off the quick-disconnect fitting it will knowingly leak out, I don't want to do that. If I have it evacuated, will the oil also be evacuated? Or is the oil unaffected by leaks and/or evacuation? Thanks for any guidance


Aaron
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page