260E sitting too high

Benz300 260E sitting too high 07-09-2004, 05:15 AM

Benz300 here's a pic of the front.... 07-09-2004, 04:13 PM

Benz300 here's the pic for the rear. 07-09-2004, 04:14 PM

Benz300 to me this looks like a 4X4... 07-09-2004, 04:15 PM

jrmd01 If you don't want a radical... 07-09-2004, 04:50 PM

Benz300 is there a part number for... 07-09-2004, 04:58 PM

Benz300 also, the front is higher... 07-09-2004, 04:59 PM

Benz300 I would like to know where I... 07-09-2004, 05:19 PM

suginami The dealer sells these pads.... 07-09-2004, 06:18 PM

Benz300 Called the dealer, the name... 07-09-2004, 06:28 PM

Benz300 allright, here's a fax that... 07-09-2004, 06:43 PM

Benz300 also, will the car require... 07-09-2004, 06:44 PM

william rogers are your tires the factory... 07-10-2004, 01:13 AM

joel my wife's 89 260E has lower... 07-10-2004, 01:26 AM

Holson Adi Yes, you will need to have... 07-10-2004, 01:40 AM

Benz300 well atleast it confirms that... 07-10-2004, 02:15 AM

cc260E I have the same on my 260E... 07-10-2004, 02:50 AM

Benz300 could someone please indicate... 07-10-2004, 04:27 AM

joel height measurement of mine... 07-10-2004, 01:45 PM

Jackd My 1989 260E, totally stock... 07-10-2004, 02:29 PM

Benz300 I've spent the whole day... 07-10-2004, 04:45 PM

brewtoo Just curious, Benz300...did... 07-10-2004, 05:19 PM

Benz300 it's been like this since i... 07-10-2004, 06:40 PM

Benz300 jackd, i noticed that the... 07-10-2004, 06:43 PM

william rogers I still think that it's just... 07-10-2004, 07:31 PM

Holson Adi This is how my car sits on... 07-10-2004, 08:35 PM

07-09-2004, 05:15 AM

Benz300

Benz Enthusiast

Join Date: Sep 2003

Location: new jersey, usa

Posts: 805

260E sitting too high

First off, I would like to know if the 87 260E had a different suspension setup than an 87 300E. the reason I ask is because I've seen most 260E's sitting higher off the ground with a lot more room between the tire and the body than any other 300E's.
Now if the suspension was wearing out I would suspect the car to sit lower not higher above the ground.
anyhow, I dont want to install aftermarket performance shocks or springs because I want to keep the soft ride. at the same time I also don't want almost a 3/4 of a foot distance in the tire well.
Any ideas how to lower it to 300E spec. and at the same time could someone please post the factory specs as to what the distance between the tires and the fenders should be .
thnx.

__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT -4. The time now is 09:32 PM.