PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tool Rental Program (http://www.peachparts.com/shopforum/tool-rental-program/)
-   -   Looking for tools not yet in the list (http://www.peachparts.com/shopforum/tool-rental-program/291664-looking-tools-not-yet-list.html)

bchhabra 10-28-2010 04:26 PM

Looking for tools not yet in the list
 
Does anyone near Norfolk VA have a timing chain crimping tool for a 240D to rent or sell?

chonahe@live.com

Hello
I need to rent a ball joint press for a 560 SEL or does anyone no a shop here on long island that would press them in for me

I saw that Billybob has a ball joint press for rent for a 560sel but I can not send him an email for some reason

Hi I need to change the front shocks on my 1989 300E (W124)? Can anybody rent me the coil spring compression tool - I live in DC Metgro area/MD.

Anyone have a w201/w124 ball joint press I can borrow or rent? I live in the Atlanta area! Thanks in Advance!

------------dirtyhands

Anyone have the valve spring compressor for the valve stem seals? Need it for a 420 (m116)...

I'm looking to replace all four rear subframe bushings on a '94 w124 (e420) in the near future and was wondering if anyone has the bushing R&R tools. The part numbers for these tools are

201 589 10 43 00
201 589 11 43 00

I'm not sure how necessary these are for the job, but I'd rather not spend a day sweating these guys in and and out (any experience would be appreciated!).

Thanks -- Greg

usaims 10-31-2010 10:38 AM

Lower Control Arm Bushings
 
Hi,

Will somebody suggest a tool to remove and install LCA Bushings on a 98 e320 (w210) I will rent or buy.

surakung 11-05-2010 08:59 PM

1 Attachment(s)
I am looking to see if someone has an internal spring compressor that I can borrow, rent, or maybe buy. I am located in Milpitas, CA. 45-min south of San Francisco.

I have a 2000 E320 Wagon

Email me at surakung@gmail.com if you do. Thanks~

(pictured below)

andrewtexas123 11-07-2010 05:10 PM

Valve Adjusment tools and/or compression test!
 
By any chance does any one have the tools needed for a valve adjustment and compression test? I mainly need the valve adjustment tools.

I have plenty of feed back on other sites and I only need them for one weekend. I will pay shipping both ways and maybe a small fee if needed ;)

I am new to diesels and also a senior in high school and at the moment I cant afford a set for my self, or else I would and keep them for future use!

I am in Danville, California..

Thanks very much!
Andrew
andrewtexas123@hotmail.com

theolonious 11-15-2010 07:04 PM

I'm interested in renting the following tools.....
 
I want to replace the injector nozzles in my 617 engine and remove the prechambers soz I can replace the seal. I've been getting some leaking in those areas and I feel it's time to see what she'll feel like with new injector nozzles.

Here are the tools I'd like to rent:


34) Prechamber ring wrench, pin type, 60X, 61X....Billybob............................$15

37) Prechamber removal tool, screw press, 61X.....Billybob............................$25.

20) Injector pop tester........................................Grezer...........................$20.


If these tools are still available let me know. I'd like to handle these transactions via money orders and mail.

I have a 1982 300sd with 350k on the clock. She runs well but always needs more attention than I'm able to give her. :( I've been happy to own her for the last three years.

Thanks
Allen

jfarmer64 01-05-2011 11:04 AM

IP Delivery Valve Splien Scoket 87 300D
 
Looking to rent a spline socket for the delivery value removal off the injector pump of a 1987 300D

MB part number 617 589 01 09 00

Dealer cost $58.

Gregstein 04-05-2011 12:24 PM

Looking for tools in all the wrong places ...
 
I'm looking to replace all four rear subframe bushings on a '94 w124 (e420) in the near future and was wondering if anyone has the bushing R&R tools. The part numbers for these tools are

201 589 10 43 00
201 589 11 43 00

I'm not sure how necessary these are for the job, but I'd rather not spend a day sweating these guys in and and out (any experience would be appreciated!).

Thanks -- Greg

bayhas 04-12-2011 02:56 PM

Quote:

Originally Posted by Gregstein (Post 2693251)
I'm looking to replace all four rear subframe bushings on a '94 w124 (e420) in the near future and was wondering if anyone has the bushing R&R tools. The part numbers for these tools are

201 589 10 43 00
201 589 11 43 00

I'm not sure how necessary these are for the job, but I'd rather not spend a day sweating these guys in and and out (any experience would be appreciated!).

Thanks -- Greg

I am doing the same job as Greg, if anyone has the tool(s), please contact me as well...

I personally dont stipulate the OEM part, the B201-1143 is prefectly fine with me...

Rebe 04-14-2011 09:40 PM

CIS-E Fuel Pressure Tester
 
Would like to rent or possibly buy a CIS-E Fuel Pressure Tester. If anyone has one to rent I would appreciate it.

Thanks, Rebe

Email at bikerman@swbell.net

connerm 04-18-2011 05:25 AM

Looking for a modified flare nut wrench for oil cooler lines on a 1985 300td. It's the modified 1 and 1/16 box end wrench.

dudemanstan 04-21-2011 05:18 AM

anyone have a set of valve wrenches to rent? nobody in the master thread is reachable, and i need to do the job. :(

JohnM. 04-23-2011 05:59 PM

Quote:

Originally Posted by Gregstein (Post 2693251)
I'm looking to replace all four rear subframe bushings on a '94 w124 (e420) in the near future and was wondering if anyone has the bushing R&R tools. The part numbers for these tools are

201 589 10 43 00
201 589 11 43 00

I'm not sure how necessary these are for the job, but I'd rather not spend a day sweating these guys in and and out (any experience would be appreciated!).

Thanks -- Greg

Special tools are not needed at all for the subframe mounts. The ones in front of the wheel can be pushed out with a deep well 27mm socket and a floor jack. The rear bushings can be removed with a piece of 3/8" all threaded rod, some nuts and washers.

toomany MBZ 06-06-2011 08:04 PM

I'll need a front wheel hub puller, MB tool #116 589 33 00.

This is for a 1984 300 CD.

toomany MBZ 06-06-2011 08:05 PM

Quote:

Originally Posted by dudemanstan (Post 2704163)
anyone have a set of valve wrenches to rent? nobody in the master thread is reachable, and i need to do the job. :(

Yes, if you still need them.

toomany MBZ 06-07-2011 11:54 AM

Quote:

Originally Posted by toomany MBZ (Post 2730671)
I'll need a front wheel hub puller, MB tool #116 589 33 00.

This is for a 1984 300 CD.

I was successful using a "rental" from the local AutoZoo, so I no longer need this.


All times are GMT -4. The time now is 08:57 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website