|
|
|
|
|
#2
12-15-2004, 10:11 PM
|
|||
|
|||
|
I am restoring a 61 Fin.
I found this source for felt and rubber. Although not original MB, the prices is reasonable and you might find a matching profile that will work for you. First here is the felt strip http://www.crlaurence.com/ProductPages/Y/YM3096_10864.html?Origin= the rubber door pillar http://www.crlaurence.com/ProductPages/A/AV4745_18526.html?Origin= Glass channel http://www.crlaurence.com/ProductPages/5/5V36_17130.html?Origin= unfortunatetly I bought the trunk seal from an overpriced web supplier - before I found CRL and paid $120 I think this would work for the trunk at $50 for a 50 ft roll!! http://www.crlaurence.com/ProductPages/A/AV4703_18542.html?Origin= You'll see that they have release chemical spray for getting the old stuff off and also special adhesive for gluing the new rubber. The windlace you can repair yourself by gluing new cloth to the metal frame that pulls off. CRL is a wholesale supplier so you will have to set up a business account they sell to the glass guys who charge you 10x as much for the same stuff. I hope this might help you.
__________________
1961 220SB Hydrak 1966 230S - Too Good for Parts 1981 300SD - now in Oakville Last edited by Hector111; 12-15-2004 at 10:19 PM. 
|
|
#4
12-16-2004, 07:26 AM
|
||||
|
||||
|
Quote:
__________________
Mike Tangas '73 280SEL 4.5 (9/72)- RIP  Only 8,173 units built from 5/71 thru 11/72 '02 CLK320 Cabriolet - wifey's mid-life crisis 2012 VW Jetta Sportwagon TDI...at least its a diesel Non illegitemae carborundum.
|
|
#5
12-16-2004, 08:33 AM
|
||||
|
||||
|
Quote:
If you prefer not to roll the dice with ebay sellers maintaining questionable reps, I've seen the MB window channel available from other internet parts sites. If it's not listed, send them an email and see if they can get it. Last edited by JMela; 12-16-2004 at 09:37 AM.
|
 |
| Bookmarks |
|
|
Linear Mode
