|
|
|
#1
|
|||
|
|||
spur gear w109 300sel 6.3?
Hi!
Do anyone know where I can find a spur gear and a pinion to a w109 300sel 6.3? |
#2
|
||||
|
||||
That's a ring and pinion -- and good luck. Have you tried searching Hemmings.com?
|
#3
|
||||
|
||||
Good luck. The pinion was a weak point on the 6.3. Last I read the list price on a new one was something like $2,500.
__________________
Over 21 years I owned several: w108 w110 w111 w115 w116 w123 w124 w126 w212 |
#4
|
||||
|
||||
Yeah, that's gonna be a tough nut...
|
#5
|
||||
|
||||
#6
|
|||
|
|||
It could also work with a spur gear and a pinion from a 280se 4.5.
And it should be easier to find, right? |
#7
|
||||
|
||||
They have a completely different rear gear. If you want to try a(n entire) rear from a 4.5, you'll be running much higher revs and the top speed will probably be lowered to around 110 or so... I think the gears themselves are incompatible.
__________________
Current: 2021 Charger Scat Pack Widebody "Sinabee" 2018 Durango R/T Previous: 1972 280SE 4.5 2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi" 1999 Chrysler 300M - RIP @ 221k |
#8
|
||||
|
||||
i know where there is
or was a 6.3 sitting forlornly in a back driveway near here in lafayette. want me to check and see if it is still there and if they want to sell it or parts?
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#9
|
||||
|
||||
there's a fellow on the www.m-100.cc classified selling a complete rear axle. -cth
|
#10
|
||||
|
||||
i had a reason
to go near the place where i thought i saw the 6.3. (i know i saw a 6.3 but i am not sure exactly where).
i couldnt find it. so it may be gone or i may not have looked the right place. tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#11
|
||||
|
||||
Quote:
|
#12
|
|||
|
|||
Quote:
|
#13
|
||||
|
||||
You can get the part from Neil Dubey at Star Motors in NY, used or rebuilt. Contact information is at the web site, www.300sel.com
Good luck! Cheers, Gerry |
#14
|
|||
|
|||
I'm putting a 300d automatic-88 in my w108 thats why i need to change ratio.
I have 3.92 ratio now but thats way to high for the 300d, thats why i need the spur gear from a 6.3. but i have discovered that they are too expensive, so now I'm searching for a spur gear and a pinion from a 4.5 with ratio 3.23 to se if they are less expensive. So if anyone have an e-mail adress or something to a junkyard that have a 4.5 in stock, it would be great. |
Bookmarks |
|
|