|
|
|
#1
|
|||
|
|||
W108 Carb Removal
Is there a good trick anyone knows to removing the carb mounting bolts from the engine side? As you look at the carbs from front of the car, its the bolts on the Right side.
I just cant seem to get any leverage with a wrench...its too tight against the cam cover. Thanks!
__________________
1969 w108 280s |
#2
|
||||
|
||||
Gotta remove the cam cover, otherwise there's just no room.
|
#3
|
|||
|
|||
I was afraid of that...
__________________
1969 w108 280s |
#4
|
|||
|
|||
Cam cover off and a 12 mm stubby will easily fit. I really struggled until I grabbed a set of extra stubby stubbies and the job became a breeze.
|
#5
|
|||
|
|||
Got ya, makes sense.
On that note, Whats the torque spec on the cover? I heard somewhere its supposed to be just tight like maybe 10-12lbs...
__________________
1969 w108 280s |
#6
|
|||
|
|||
I do it by hand in three passes to "snug" starting with the middle bolt. Set the gasket evenly every time.
|
#7
|
|||
|
|||
Got it out!
Thanks guys!
__________________
1969 w108 280s |
Bookmarks |
|
|