power brake booster for a W110 200p

[stoneboy]

is this a correct power brake booster for my model . The one on the car is totally rusted and in a bad shape, no sticker left .Just needed your help if this would work

This one is available
Brand ATE ; 03-6140-1500.4

was there a difference of brake booster between 4cylinder & 6 cylinder W110

[CTD]

Originally Posted by stoneboy

is this a correct power brake booster for my model . The one on the car is totally rusted and in a bad shape, no sticker left .Just needed your help if this would work

This one is available
Brand ATE ; 03-6140-1500.4

was there a difference of brake booster between 4cylinder & 6 cylinder W110

All 110 and 111 sedans of the same model year will take the same brake boosters. They didn't change by model, but they did change by year, so an early car's brake booster will be different than a later car.

I will caution you about replacing the brake booster though. If it is rusty on the outside, then it is probably a replacement unit that wasn't painted on the outside and is just fine on the inside. They usually only go bad if brake fluid leaks into them from the master cylinder and damages the diaphragm.

I would check to see whether the brake booster works or not before considering a replacement, as replacements are very expensive.

[stoneboy]

this car wasnt used for 35 years , everything inside is rusted and jammed so just wanted to replace , I agree with you this part is expensive , but I didnt wanted to compromise on safety so asked this question on the forum here ,

its for a 1968 4cyl petrol 200 W110 (last year )

so would this work
This one is available
Brand ATE ; 03-6140-1500.4

[stoneboy]

can the booster be repaired and is the diaphragm available