|
|
|
#1
|
|||
|
|||
Temperature sender
Hi all,
Stupid question but on my 72 250 M130 W114 that I'm trying to remove the head, between spark plug 2-3 there is a wire that comes off that and leads through the firewall. Is that the temp sending unit? If so how do I remove it? I tried turning the brass nut but managed to remove some of the brass. Do I need to take it off the part that is in the head? it only has 2 sides where a wrench can go (just for your refrence) |
#2
|
|||
|
|||
That is not a wire ..it is a hollow capillary tube and it has a charge in it..meaning the gauge is mechanical..do not cut/bend that tube.
Soak it w/BP Blaster overnight and carefully try again. |
#3
|
|||
|
|||
Thx Arthur,
I take it, I attack the brass part again correct? |
#4
|
|||
|
|||
Yeah...tap around it a bit with a light ball pean..just enough to set up some vibration.
Then don't try and turn until you have a real tight grip. They can be a PIA, but worth taking your time b/c they cost a fortune. |
Bookmarks |
|
|