Thread: Goin' w/ studs for the head on a 606
View Single Post
  #22  
Old 11-02-2005, 02:51 PM
aklim's Avatar
aklim aklim is offline
Registered User
  
Join Date: Apr 2000
Location: Location: Greenfield WI, USA
Posts: 8,514
Quote:
Originally Posted by 96E300D
The head better be flat after a $700+ bill. I have no reason to suspect the block would have warped at all (no excessive heat). The studs for the 102mm bolts are around $5.00, plus washers and nuts. However, at this point they're working on find the 115mm replacements. The length of those studs need to be 5.625" and I guess they have to dig deep in the obscure bins to find some (hopefully).
Matt
Until you run a straight edge over the head and block, you don't know. Ask me how I learnt that lesson.
__________________
01 Ford Excursion Powerstroke
99 E300 Turbodiesel
91 Vette with 383 motor
05 Polaris Sportsman 800 EFI
06 Polaris Sportsman 500 EFI
03 SeaDoo GTX SC Red
03 SeaDoo GTX SC Yellow
04 Tailgator 21 ft Toy Hauler
11 Harley Davidson 883 SuperLow
Reply With Quote