http://www.peachparts.com/shopforum/showthread.php?t=119245
From the thread above. On the 500e the starter motor test will be a bit more difficult since the battery is in the trunk. There is a 3 prong connector near the brake booster/reservoir...
Quote:
Here is another prof positive test that will test the same point , but in a different way..
Get a jumper wire and hook one end to the bat + ...
Now, unplug the connector at booster and I want you to look at the 3 MALE connectors at the part of the connector that is screwed to the wall..[not the part you unplugged w/ female connectors]
Take your bat + wire and touch the CENTER MALE connector .. the starter should crank the engine ..if not , you have a problem at the starter or wire going from this connector to the starter.. if the starter turns the engine over [ cranks] w/test, the starter/sol are verified as GOOD.
|