Quote:
|
Originally Posted by t walgamuth
i doubt that that pin is holding anything if it spins right away. if you grab it with vice grips and carefully pull straight out i bet it will come right out. when they are holding things they will resist and not turn. do you have the rad out? if not better get it out of the way so you wont break anything off.
the bolt for pulling is one like or from the thermostat housing. b e careful taking them out they are often very fragile and half eaten away.
good luck.
tom w
|
thanks for the thermostat housing bolt tip. yes, i do have the rad off. vision's of driving something through the rad overcame my temporary confusion. i can only see the top of the tension rail right now, it doesn't look like any of the 3 types of rail in the manual. i've been lucky the chain didn't come off. thank's for all the help you've given me.