Quote:
|
Originally Posted by alienman
Hi George,
Could you let me know what kind of code reader I would need to get into test mode? I was under the impression that there were only readers for obd2 cars, and that getting into test mode on california cars required some manipulation of the button on the x92 connector.
When I check the voltage between pins 2 and 3 on the x11 connector with KOEO, I get 6v which would indicate around 55% duty cycle. From what I understand, it should be either around 2v (85%) or 4v (70%). Thanks.
|
i'm gonna hafta look it up now. once you check and clear codes you should
be able to read on/off ratio. my problem is i use the tools so don't do it
this way. but if check engine light is still on then you got another section
thats giving problems and needs code reader to check. not sure if basic one will work but more expensive ones should pull codes.
will check on monday.
george