Thanks Charles,

I did prime the manual pump, and verified fuel pressure by checking the bleed off on the filter canister. I even resorted to using the air method but that failed too. I held the throttle open and it made no difference. Just as a note, even when I did the baylor method, the fuel welled up very, very little. less than a drop. I just watched carefully for the first sign of fuel, and stopped there.
So is my home-made tube is ok?
all I have to do is:
1 remove the fuel line from number 1 Inj.
2 put my drip line on the IP pump.
3 Pump the manual valve for pressure.
4 Rotate till I get close to 24 deg and watch for fuel to start streaming from the tube.
5 When I get to 24 deg mark the fuel should stop to a drip every 5-6 seconds.
Am I missing anything?
Regards,
Bryan