Quote:
|
Originally Posted by gdemoss01
I just did this today on a W116 300SD. It has no door switches. I discarded the vacuum system entirely and just mounted actuators in the door. If I remember correctly (I've had a nap since then) the violet, violet black and red from the electronic box connected to wire from the fuse block I installed under the hood, the white black and brown black went to ground, green black and blue black went to actuators. I think that's it, but if you want me to make sure send me an email. The kit was about $60 and included every hardware imaginable, 4 actuators, 2 keyless push button thingys, and capable of dome light, starter disable, etc.
Rev Dr. G., Church of the Sub-Genius
|
Well gentlemen, I do say, i think ive got it. Actuator is now fuctioning..Your wire colors were correct also. I just have to mount the actuator in the door run the wires...i might hook up the horn and the flashing light thing..perhaps even the domelight bit..im not sure...any suggesttions ? would it be too difficult (at this point i dont know what could be any harder) I have 3 - 4pin relays and 2 - 5pin w/ wires....
Good Work Mates
Kris