OK guys, I did a search but to no avail. I'm finishing up my FE rebuild and am installing the rebuilt calipers and new hoses. There is a plug in the hole for the brake hose and it has two copper washers. The question is...

do I need to use these two washers or one or none?

I don't recall these washers on the old calipers but then it's been quite a while. I checked the repair CD and there is no caliper drawing cross section.

TIA

__________________
Regards

Warren

Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor

Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL

ENTER > = (HP RPN)

Not part of the in-crowd since 1952.