Quote:
|
Originally Posted by mctwin2kman
Unfortunately the way the MB connector for the O2 is you can not slide it out and probe without breaking the connection and I am not buying an MB Breakout Box to test the O2 once or twice. So you must improvise.
|
You're not following me.
When I say back-probe, I mean you
leave the connector connected, slide a safety-pin into the connector WITH the wire, connect your DVOM to the pin and read the values.
As for re-sealing pierced insulation, it doesn't take much moisture to " creep " into the hole & spread up the wire.
Remember when you're dealing with VERY LOW voltage readings, 0.1 volt, etc. or computer GROUND signals, it pays to be anal about sealing any " wounds ".