Quote:
|
Originally Posted by greasybenz
I'm getting pissed of the the stupid air box rattling and I don't want replace whatever I need to keep its mounted, So I remember that one intake kit you made with the Fram filter and I want to do the same thing So what did you need to make the intake pipe and everything else like the oil line and what not.
|
The crank case vent tube appears to be connected directly to the drain tube by a rubber hose?
If this is what you have done, it needs to be changed ASAP.
The crank case vent; must vent to atmospheric pressure, or you build pressure until it turns off engine, blows oil seals/gaskets and/or blows around the oil fill cap.
__________________
ASE Master Mechanic
Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer
1985 300SD
1983 300D
https://www.boldegoist.com/