|
Preliminary work:
Front bumper removed.
Right lamp unit removed
Removal
Filler pipe (4) with bolt
unscrew and take out.
Lines to heat exchanger with screws (1)
slacken and pull off.
4 bolts on engine compartment lining below washer reservoir.
unscrew.
Washer fluid indicator (2)
withdraw.
Washer reservoir with nuts (3)
unscrew.
Washer reservoir
take out downwards.
Washer pump
withdraw.
Installation
Installation is performed in reverse order.
NOTE: Coat filler pipe (4) at reservoir with lubricant (e.g. soft soap) to ensure the rubber seal does not drop into the reservoir when the filler connection is pressed into the reservoir.
__________________
1995 S600, 1 of 618 (sold)
"Speed is just a question of money...how fast you wanna go?"
LONG LIVE THE W140!
Visit my Web Page at www.v12uberalles.com
|