Quote:
|
Originally Posted by vwoodruff
My question is this... How in the hell can you tell if the shutoff valve has properly grabbed the appropriate piece? There is almost zero clearance between the valve and the oil filter housing, making it quite difficult to manuever. ANd if I have to take off and put on the mounting bolts more than once, I'm going to lose it!  |
Just take your time and do it calmly...
I like to wiggle stuff around or whip out the vac pump and see if it sounds/feels like it is ACTUALLY pulling on the rack. If you can imagine how it works inside, you will figure out how to properly put the shutoff in
