Quote:
|
Originally Posted by thorsen
I am in the process of removing the differential on my 1984 300SD. I am down to the four main bolts that hold the diff to the sub-frame. I can get my 19mm box end wrench on the nuts, but I can't enough leverage to break them free. Not enough room for my breaker bar. They are soaking in Busty tonight while I think about it some more.
Are there any hints/tips/tricks to removing these four nuts???
|
Slip a helper wrench over the other one?
Its tricky to explain...but you use the boxed in end of one wrench (an extra) and put it on the open end of the wrench you are trying to turn with in such a way you can get way more leverage. The only downside is...non-quality tools will break
