dkveuro,
My warm up regulator has the adjustment screw and lock nut installed by the a previous owner.
M.B. DOC,
I think you're correct, something's wrong with my readings if the car is running fine cold below injector opening pressure.
I suspect air in my tester line.
The guage does not have a bleed off screw to bleed air from the guage and lines after installing.
The manual describes a proceedure to purge air from from the lines that I followed but I suspect I didn't get it all out.
I'll try purging the lines again and take new readings.
P.S.
I received a system pressure valve repair kit from Fastlane today.
Ordered after 6:30 PM EST 1/16/06


Thanks to all.
I'll keep you updated.

Knarf

__________________
72 350SL #69
73 450SL Parts Car?
78 450sl Parts Car
79 450SLC - Sold
1985 280sl
87 190E 2.6 - Donated
90 300E-Junked
97 E420