View Single Post
  #2  
Old 01-24-2006, 11:02 PM
C32AMG's Avatar
C32AMG C32AMG is offline
Registered User
 
Join Date: Mar 2004
Location: new york/orange county
Posts: 639
If you drive in the D position the transmission will start in 2nd gear, from there count the up shifts.
If you feel two shifts 3rd and 4th, in 4th gear, the RPM reading is the true number


In position 2 the transmission starts in 1st gear from a dead stop, In the D position to command a 1st gear
Start you must active the kick down solenoid, the switch under the gas pedal. In a quit location open the
Passenger side door, with the ignition switch on, floor the gas pedal if the system is working you should hear
a hear a click in the transmission


If you don’t, the KD fuse is blown; or the gas pedal is not pushing on the switch; the switch or solenoid
Is defective, you have a break in the wire going to the solenoid.
Reply With Quote