That should do it..
You will have to use smaller test lead ends for the tool, as the tool pictoral I posted is for the 16 pin connector [ vs your 38 pin], which takes the larger bananna plugs. I think you will find a single strand # 20 wire will fit the 38 pin..

Also , on the 38 pin , power [ 12v +/-] for the tool will be pin 1/- and pin 3/+ .. the odd color will go to pin 4 for HFM module initiation...

Here is some good info... go to page 12 for 38 pin connector locator diagram

http://www.autolib.diakom.ru:8000/CARS2/pribor/cs1000/manual/cs1000_mb.pdf